Gocycle GS and Gocycle GX will arrive with Gocycle Folding Pedals installed from the factory.
Gocycle G3 will arrive supplied with Gocycle G3 Platform Pedals in the box.
Gocycle G3 Platform Pedals are designed to be fitted to a specific side of your bike, the right pedal has a right handed thread, the left pedal has a left handed thread.
To identify each pedal, hold the pedals side by side with the threaded section together. The larger section of the pedal platform should be towards the rear of your bike. The left pedal will also have a small ring between the pedal platform and threads.
The left hand pedal must be threaded into the left hand crank and turned anti-clock wise to tighten. The pedal must be tighten using an 8mm hex key on the inside of the crank arm.
The right hand pedal must be threaded into the right hand crank and turned clock wise to tighten. The pedal must be tighten using an 8mm hex key on the inside of the crank arm.
To install Gocycle Folding pedals please follow the steps above. The Folding pedals will have a L stamped into the end of the left hand pedal and an R on the right hand pedal. These pedals will need to be tightened using a 15mm open ended spanner.
The recommended torque for both variants of Gocycle pedal is 30 - 45Nm.
The information above is shown in the following video -