Adjusting the PitstopWheel® Quick Realease Cam levers is an important task throughout the lifetime of the product.
Cam levers will settle after initial use and prolonged use will cause wear. As such the cam levers
require vigilant attention and adjustment including checking every cam as part of the pre-ride checks.
All three Pitstopwheel® quick release cam levers should have equal resistance when closing or
opening. As per the pre-ride checks there must be a maximum of 20mm free play measured at the tip of the cam lever when open. In the event that the levers have different closing/ opening resistance or free play in excess of 20mm you must adjust the cam levers before riding.
See Section 6.8 of the GS G3 Product Manual and Section 7.8 of the G2 and G3 G3 Product Manual.
Also see the video below;