Force a Firmware Update

Also referred to as a 'Boost Button Power-Up' and forces The Gocycle to accept a fresh firmware update. This will fix an issue where a firmware update has failed.

To force and firmware upgrade on all Gocycle modes (not applicable to Gocycle G1), please follow this procedure. This is also referred to as a boost button power up:

1. Turn OFF the Gocycle
2. Close the app down fully
3. Hold the boost button whilst turning ON the Gocycle
   1. Gocycle G4i, GXi G3C or G3C, Rotate and hold the left twist switch down
   2. Gocycle G4, GX, GS or G2 press and hold red boost button
4. After the Gocycle has powered up, you can release the boost button, every other LED will be illuminated.
   1. Dash display on Gocycle G4i, G4i+, GXi, G3 or G2
      1. 
   2. Dash display on Gocycle G4. (GX does not change and there is no beep on start up)
      1. 
5. Press '+' icon in the top right of the screen and follow the steps 
6. Update the firmware