Turn the Gocycle off and on again. Once powered up one of the following sounds will occur.
Number of beeps |
Meaning of beeps |
Action |
Chime | Normal start up sound | No action needed |
0 beeps | Motor Controller is not running. | Contact Dealer or Gocycle |
1 beep | Motor Controller is running, but has not received any communication with dash | Contact Dealer or Gocycle |
3 beeps |
Gocycle has not been registered. |
20 miles until it will not assist until the Gocycle has been registered |
4 beeps |
Gocycle has not been registered. No miles remaining. |
Gocycle will not assist until the Gocycle has been registered |
5 beeps |
Factory state |
Gocycle will not assist until the Gocycle has been registered |
6 beeps |
Motor Hall sensor needs to be calibrated |
Calibrate the hall sensor by connecting to the Gocycle and pressing '⋮'. |
7 beeps |
There is a pending service rating in the app that you need to review 1-5 stars in the settings menu. |
After you have completed the review, the 7 beeps will stop and the Gocycle will Chime on power up. |
9 Beeps |
Stolen Gocycle |
Contact Gocycle |