1. Clean the area around the frame number label on the Cleandrive®.
Ensure it is clean and dry before fitting the lock holster
Please note -
The holster is a semi permanent installation. Removing the holster may cause damage to the paintwork on the Cleandrive®.
|2. The guide tool will align with the bolts above and below the frame number label|
3. Insert the guide tool into the holster and align the holster kit with the Cleandrive®.
Once happy with the direction and angle, remove the backing from the adhesive strips on the holster.
Carefully press the holster kit onto the Cleandrive®.
|4. Remove the guide tool and firmly press all areas of the holster onto the Cleandrive®|
|5. Check the edges and ensure every section is fitted to the Cleandrive®.|
|6. Insert the Abus Bordo lock into the holster kit.|
|7. Press down to ensure it is seated properly.|
|8. Pull the retaining band to the rear hook|
|9. Stretch the top of the retaining band over the top section of the lock to firmly hold it in place.|
|10. Check the lock and holster are secure.|