|
1. Clean the area around the frame number label on the Cleandrive®. Ensure it is clean and dry before fitting the lock holster Please note - The holster is a semi permanent installation. Removing the holster may cause damage to the paintwork on the Cleandrive®. |
 |
| 2. The guide tool will align with the bolts above and below the frame number label |  |
|
3. Insert the guide tool into the holster and align the holster kit with the Cleandrive®. Once happy with the direction and angle, remove the backing from the adhesive strips on the holster. Carefully press the holster kit onto the Cleandrive®. |
 |
| 4. Remove the guide tool and firmly press all areas of the holster onto the Cleandrive® |  |
|
5. Check the edges and ensure every section is fitted to the Cleandrive®. Press firmly again in every area. |
 |
| 6. Insert the Abus Bordo lock into the holster kit. |  |
| 7. Press down to ensure it is seated properly. |  |
| 8. Pull the retaining band to the rear hook |   |
| 9. Stretch the top of the retaining band over the top section of the lock to firmly hold it in place. |   |
| 10. Check the lock and holster are secure. |  |
 |
|
You can buy a Lock Holster Kit for your Gocycle at our webstore or via your nearest Gocycle dealer.