|1. Locate and remove the two screws from the rear light cable cover using a 3mm hex key|
2. Carefully remove the rear light cable cover
CAUTION - The rear light cable may be attached to the cover
|3. Run the rear light cable through the rear light bracket|
|4. Plug the rear light cable into the rear light||
5. Line the holes on the rear light bracket to the screw holes in the shock pin.
CAUTION - Ensure the wires are not covering the bolt holes during installation.
You may need to push excess wire back into the frame.
|6. Insert and tighten the two rear light bracket screws to 3Nm using a 3mm hex key|