-
Tech Bulletin 30 - Don't use Cargo Bike Tires on "Solo" Gocycles
-
Tech Bulletin 29 - GOCYCLE FASTFIELDS SERVICE required every 2,000 mile / 3,200 km.
-
Tech Bulletin 28: G4 Brake Lever and Caliper Torque Check
-
Tech Bulletin 27: Intermittent Battery Button (G4/G4i/G4i+)
-
Tech Bulletin 26 : Fitting the Gocycle Rear Luggage Rack (with Brace)
-
Tech Bulletin 25: (GX / GXi) Latch Pin Torque Check
-
Tech Bulletin 24: (GX / GXi) Shock Washer
-
Tech Bulletin 23: Safety Check - (GX / GXi) Fold Latch Function
-
Tech Bulletin 22: (GX, GXi) Thumb Screw
-
Tech Bulletin 21: (GX, GXi) Frame Lower Hinge Bolt Retention Clip
-
Tech Bulletin 20: (All Models) Handling of Flooded or Submerged Batteries
-
Tech Bulletin 19: (GS) Gocycle GS Power Cable
-
Technical Bulletin 18: (All Models) Lockshock™ Maintenance
-
Technical Bulletin 17: (G3) Important Information: G3 Cam Cover Assembly Screws
-
Technical Bulletin 16: (G2, G3, GXi) Important Information: Dash Flash Service and Inspection Reminder
-
Technical Bulletin 15: (All Models) Important Safety Notice: Service Interval and Maintenance Schedule
-
Technical Bulletin 14: (G2) Important Safety Notice: How to Check and Adjust the G2 Gocycle Headset
-
Technical Bulletin 13 (replaces Technical Bulletin 11): (G1, G2, G3C, GS) Important Safety Notice: Check Pitstopwheel Quick Release Cam Free Play
-
Technical Bulletin 12: (G2) V77 Firmware Update Available: Gocycle G2 Software Improvement
-
Technical Bulletin 10: (G2) Important Information for Lithium Ion Batteries
-
Technical Bulletin 9: Addendum: (G2, G3, GS) Over-folding Cleandrive® during Assembly
-
Technical Bulletin 8: (G2) Gocycle G2 Correct Charging Procedure
-
Technical Bulletin 7: (G2) Mandatory Firmware Upgrade – Gocycle G2 Drive Software Improvement
-
Technical Bulletin 6: (G1) Gocycle G1 Warning Sounds
-
Technical Bulletin 5: (All Models) Gocycle Crank Arm Adjustment Check
-
Technical Bulletin 4: (G2) Frame Seat Post Clamp Maximum Tightening Torque
-
Technical Bulletin 3: (G1, G2) Gocycle Rear Hub Bearing Adjustment
-
Technical Bulletin 2: (G2) Handlebar Fold Mechanism
-
Technical Bulletin 1: (G2) Handlebar Over-Rotation
-
2010 June 13: Safety Notice: Front Motor Fork (PDF)